LED Lights

LED Lights


Features

  •  Confirms to BIS standards, LM79 & IP 66
  •  Reputed LED Chips (OSRAM/CREE/NICHIA/LUMILEDS)
  •  Robust LED drivers (Philips/Meanwell/In-house)

Product Name Product Photo Wattage Ordering Code Replacement for
20W LED Streetlight
20W CSPL20WACSL 40W FTL, 24W CFL
36W LED Streetlight 36W CSPL36WACSL 70W HPSV, 40W CFL
70W LED Streetlight
70W CSPL70WACSL 150W HPSV, 96W CFL
90W LED Streetlight 90W CSPL90WACSL 150W MV
120W LED Streetlight
120W CSPL120WACSL 250W HPSV
140W LED Streetlight 150W CSPL150WACSL 250W MV
190W LED Streetlight
190W CSPL190WACSL 400W HPSV

Smart LED streetlights

LED streetlight with in-built metering capabilities and Sub-1GHz/ ZigBee/LORA/GSM connectivity enabling itself for individual remote monitoring and control. Each of the streetlights can be switched on/off and dimmed (0-100%) independently at predefined timings or by sending a command through CCMS software. Firmware can be updated over the air.


Product Specification


Housing Aesthetically and thermally designed pressure die-cast aluminium housing with ingress protection level of IP66 and toughened glass.  
Finish Epoxy powder coated  
Light Source High Power LEDs (OSRAM/LUMILEDS/any other leading brand) confirming to IS16106, CRI >70, luminous flux > 130 lumen/Watt, CCT 5700K (ANSI C78.377A CCT standard)  
Secondary Optics PMMA lens with batwing light pattern for optimum road coverage with uniform lux levels.  
Control Gear Built-in, replaceable electronic driver with PF>0.9, efficiency > 85%, THD<10%, 90-300VAC operating range.  
Protection On board surge voltage protection up to 4KV, external protection up to 10KVA, output short protection, under voltage and over voltage (440V).  
Dimming PWM dimming (100%-0%)  
Communication Sub-1GHz/Zigbee/LORA/GSM  
Monitoring parameters Voltage, Current, Frequency and PF.
Compliance IS16105, IEC60598/IS10322, IEC 61000-4-11
Ordering Code CSPL60WAC-S CSPL80WAC-S CSPL120WAC-S
System Wattage 60W 80W 120W
Input Voltage/Current 230V/0.26A 230V/0.35A 230V/0.52A
Luminous flux 6630 lumens 8840 lumens 13260 lumens
System Lumen efficacy >100 lm/Watt >100 lm/Watt >100 lm/Watt
Luminary Mounting Side entry (55 mm pipe dia) Side entry (55 mm pipe dia) Side entry (55mm pipe dia)
Luminary Dimensions 260X520X70 mm 260X520X70 mm 260X520X70 mm
Weight 4 Kgs 4 Kgs 4 Kgs
Applications Road lighting, Perimeter lighting and outdoor parking lots

Centralised Control and Monitoring System (CCMS)

Smart monitoring system consists of

  •   Smart node – capable of capturing & monitoring the parameters of the connected devices like streetlight and capable of transmitting the same to a nearby gateway through RF mesh.
  •  Gateway – Capable of collecting the data from the nodes through RF mesh and transmitting the same to Server through GPRS and taking the instructions from Server to control the nodes.
  •   Server – Collects and manages the data from the gateways, takes instructions from the end users and act on it.